This document is an overview of all the parameters used in the 005 numeric (RPL_ISUPPORT) of the IRC protocol, with a short description of what all the parameters mean.

This page now just lists some examples of what is being used, which include things not in the draft. The reason they're not in draft is because they are either experimental or considered to be of no real use.

A simple example output: 005 nick PREFIX=(ov)@+ CHANTYPES=#& :are supported by this server

Here is the list with all parameters with a short description:

Parameter Argument Servers Explanation Example
PREFIX (modes)prefixes all A list of channel modes a person can get and the respective prefix a channel or nickname will get in case the person has it. The order of the modes goes from most powerful to least powerful. Those prefixes are shown in the output of the WHOIS, WHO and NAMES command.

Note: Some servers only show the most powerful, others may show all of them.

PREFIX=(ov)@+ (IRCNet, Bahamut, ircu)
PREFIX=(ohv)@%+ (Hybrid)
CHANTYPES chars all The supported channel prefixes. CHANTYPES=+#& (ircu)
CHANTYPES=&# (Bahamut)
CHANTYPES=#& (Hybrid)
CHANMODES A,B,C,D all This is a list of channel modes according to 4 types.
A = Mode that adds or removes a nick or address to a list. Always has a parameter.
B = Mode that changes a setting and always has a parameter.
C = Mode that changes a setting and only has a parameter when set.
D = Mode that changes a setting and never has a parameter.

Note: Modes of type A return the list when there is no parameter present.

Note: Some clients assumes that any mode not listed is of type D.

Note: Modes in PREFIX are not listed but could be considered type B.

CHANMODES=b,k,l,imnpst (ircu)
CHANMODES=beI,k,l,imnpstaqr (IRCNet)
CHANMODES=beI,k,l,imnpsta (Hybrid)
MODES number all Maximum number of channel modes with parameter allowed per MODE command. MODES=3 (IRCNet)
MODES=4 (Hybrid)
MODES=6 (ircu
MODES=13 (Bahamut)
MAXCHANNELS number all Maximum number of channels allowed to join.
Note: This might exclude &channels.
NICKLEN number all Maximum nickname length. NICKLEN=9 (IRCNet, ircu, Hybrid)
NICKLEN=30 (Bahamut)
TOPICLEN number all Maximum topic length. TOPICLEN=80 (IRCNet)
TOPICLEN=120 (Hybrid)
TOPICLEN=160 (ircu)
TOPICLEN=307 (Bahamut)
KICKLEN number all Maximum kick comment length. KICKLEN=80 (IRCNet)
KICKLEN=120 (Hybrid)
KICKLEN=160 (ircu)
KICKLEN=307 (Bahamut)
CHANNELLEN number all Maximum channel name length. CHANNELLEN=50 (IRCNet)
MAXBANS number all Maximum number of bans per channel.

Note: This number might be for all lists together, such as the invite and ban exception list.

MAXBANS=25 (Hybrid)
MAXBANS=30 (IRCNet, ircu)
MAXBANS=100 (Bahamut)
NETWORK name all The IRC network name. NETWORK=EFnet (Hybrid)
NETWORK=Undernet (ircu)
NETWORK=DALnet (Bahamut)
EXCEPTS   Hybrid, IRCNet The server support ban exceptions (+e mode). See RFC 2811 for more information. EXCEPTS
INVEX   Hybrid, IRCNet The server support invite exceptions (+I mode). See RFC 2811 for more information. INVEX
SILENCE number ircu, Bahamut The server support the SILENCE command. The number is the maximum number of allowed entries in the list. SILENCE=15 (ircu)
SILENCE=10 (Bahamut)
STATUSMSG string none? The server supports messaging channel member who have a certain status or higher. The status is one of the letters from PREFIX. STATUSMSG=+%@
WALLCHOPS   Hybrid, ircu The server supports messaging channel operators (NOTICE @#channel)

Note: This has been replaced by STATUSMSG.

ircu also supports a WALLCHOPS command?

Note: ircu doesn't support voiced persons because it conflicts with +channels.

Note: Hybrid supports everything in PREFIX

Note: Hybrid 6 and ircu don't support it with PRIVMSG, Hybrid 7 does.

CASEMAPPING string all Case mapping used for nick- and channel name comparing. Current possible values:

ascii: The chars [a-z] are lowercase of [A-Z].

rfc1459: ascii with additional {}|~ the lowercase of []\^.

strict-rfc1459: ascii with additional {}| the lowercase of []\.

Note: RFC1459 forgot to mention the ~ and ^ although in all known implementations those are considered equivalent too.

CASEMAPPING=rfc1459 (ircu, Hybrid, IRCNet)
CASEMAPPING=ascii (Bahamut)
CHARSET string KineIRCd The charset were all the server generated messages are in. This includes text in numerics and notices.

Note: It doesn't say anything about wether the UTF-8 is allowed in a nick or not.

Note: We strongly recommend to use of UTF-8 in IRC.

Note: ircu used to use this to say what case mapping they were using. They used "rfc1459" as the string. In case it has that, you may assume it means case mapping and not charset.

STD string none? The standard which the implementation is using. STD=i-d
RFC2812   IRCNet Server supports RFC 2812 features. RFC2812
CHIDLEN number IRCNet Channel ID length for !channels (5 by default). See RFC 2811 for more information. CHIDLEN=5
PENALTY   IRCNet Server gives extra penalty to some commands instead of the normal 2 seconds per message and 1 second for every 120 bytes in a message. PENALTY
FNC   IRCNet Forced nick changes: The server may change the nickname without the client sending a NICK message. FNC
NOQUIT   Bahamut Isn't this server to server feature, nothing to do with clients? NOQUIT
USERIP   ircu The USERIP command exists. USERIP
CPRIVMSG   ircu The CPRIVMSG command exists, used for mass messaging people in specified channel (CPRIVMSG channel nick,nick2,... :text) CPRIVMSG
CNOTICE   ircu The CNOTICE command exists, just like CPRIVMSG CNOTICE
MAXTARGETS number Hybrid Maximum targets allowed for PRIVMSG and NOTICE commands MAXTARGETS=4 (Hybrid)
KNOCK   Hybrid The KNOCK command exists. KNOCK
VCHANS   Hybrid Server supports virtual channels. See vchans.txt for more information. VCHANS
SAFELIST   Bahamut The LIST is sent in multiple iterations so send queue won't fill and kill the client connection. SAFELIST
WATCH number Bahamut Maximum number of WATCHes allowed. WATCH=128 (Bahamut)
WHOX   ircu The WHO command uses WHOX protocol. WHOX
CALLERID   Hybrid The server supports server side ignores via the +g user mode. See modeg.txt for more information. CALLERID
ACCEPT     [Deprecated] The same as CALLERID. ACCEPT
LANGUAGE string,string,... KineIRCd [Experimental] The server supports the LANGUAGE command. All server generated messages (numerics and notices) will be send in the requested language.

It contains a list of the languages you can select. See BCP 47 for more information on language tags.

Note: The server will always encode things with UTF-8.

How to send them all if the string becomes too long?


Some of those parameters define a length. It's currently NOT defined if this is in octects or (multi-byte) characters. If there isn't any charset defined you may assume it's in octects.

I would like to be able to place some links to commands like SILENCE, USERIP, CPRIVMSG, CNOTICE, KNOCK, and others. Whatever may be useful to client authors. They don't seem to put any documentation online.

TOPICLEN, KICKLEN and CHANNELLEN are considered to be useless and may be removed in the future.

Some older version of this document said CHARMAPPING instead of CASEMAPPING. This was an error and has been corrected.

For comments or corrections, please mail

You should find the latest version of this document here.

Document last changed on Dec 12, 2002.